-
ChargeMaster Plus 24/110-2
฿111,800ChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into one single device. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of two batteries in a fast and safe way and works anywhere in the world. -
The CMCE device, the balancing or compensating device for variable electric fields and electrostatic charge deionizing is a Protection System that works against atmospheric discharges and is an electromagnetic fields protector that prevents the formation of the upward leader that occurs when lightning is about to strike. It also significantly minimizes (60%-90%), the indirect effects caused by lightning strikes in its surroundings, outside its coverage radius. Of greater deionizing power, For use in medium-sized fishing or expedition boats, Catamarans, Small yachts, etc.
-
ChargeMaster Plus 24/60-3
฿59,180ChargeMaster Plus is the next generation of battery chargers that integrates multiple functions into one single device. Replacing auxiliary chargers, battery isolators and VSR, ChargeMaster Plus reduces system complexity and cost. Designed for versatility, it charges virtually any combination of two or three batteries in a fast and safe way and works anywhere in the world. -
The rubber exhaust hose is the most flexible hose available, because of the large number of spiral turns and the smooth EPDM rubber. The completely smooth internal surface of the hose will reduce back pressure in the engine. Exhaust hoses with an internal diameter up to Ø 152mm have a bending radius of 1,5 x the diameter. Exhaust hoses with an internal diameter of more than Ø 152mm have a bending radius of twice the diameter. Temperature resistant between -30º + 100ºC with brief temperatures of 115ºC.
Bending radius (mm) 90 Suitable for Exhaust Max. pressure (bar) 3.3 Internal diameter (mm) 60 External diameter (mm) 68 Hose application Waste water -
The RF25N is a medium duty rudder feedback unit with a Micro-C interface. The RF25N will attach directly to industry standard Micro-C systems for straight-forward installation.
-
Reduce your risk of collision with this fully integrated, Class-B AIS transponder - essential for navigating today’s busy shipping lanes and congested ports. Compact in size, lightweight, fully waterproof, with low power draw and featuring multiple connections, the NAIS 500 is ideal for networking with any compatible MFD display and VHF system.
-
NSX™ 3007, No Transducer
฿64,680Smart Chartplotter / fishfinder. No Transducer. No Chart. 7-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required. -
N2K Wind Mast Cable 20 M
฿4,00020 m (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet) suitable for 508 and 608 Wind Sensors -
213 Masthead Unit Only
฿54,000The 213 Masthead unit is an ocean-proven high performance wind sensor, providing raw wind speed and angle data to the instrument system. For H5000 and H3000. -
The CMCE device, the balancing or compensating device for variable electric fields and electrostatic charge deionizing is a Protection System that works against atmospheric discharges and is an electromagnetic fields protector that prevents the formation of the upward leader that occurs when lightning is about to strike. It also significantly minimizes (60%-90%), the indirect effects caused by lightning strikes in its surroundings, outside its coverage radius. Thanks to its small size and weight, it is also special for use in Small Boats, Sailboats, Marine Buoys, etc.
-
Sonar Hub Module Only
฿41,400Compatible with the complete line of Simrad NSS Sport, NSE Expert and NSO Offshore multifunction displays, the plug-and-play network solution makes it easier than ever to identify productive fishing areas with connectivity to the latest Simrad sonar technologies - including StructureScan® HD and CHIRP -
Coastal coverage of the South Asian coast and the Indian Ocean from Gwadar, PK to Da Nang, VN and the South China Sea.
-
Master Easy View 5
฿18,370The EasyView 5 features a sharp, waterproof display which is clearly readable in daylight. Thanks to the colour touchscreen and multi-language menu, the display is a pleasure to operate. Easily customizable favourite pages show all relevant system information at a glance. -
SIMRAD HALO20 + Radar
฿118,900The HALO20+ radar offers near real-time visibility with industry-leading 60 RPM performance at close range—delivering exceptional collision avoidance. Instantly identify hazards with VelocityTrack™ Doppler technology, while enjoying simultaneous short- and long-range coverage of up to 36 nautical miles—all from a compact, 20-inch dome antenna. -
The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data and more.
-
Triton² Speed / Depth / Wireless Wind Instrument pack. Includes Triton² Instrument Display, DST810 Depth/Speed/Temperature transducer, WS320 Wireless Wind Sensor and a NMEA2000 starter kit.
-
608 Networked Wind Sensor
฿27,400Networked wind sensor for Triton2, Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable. Compatible with previous 508 and IS20 wind sensor mast cables and brackets. -
B&G HALO20+ Radar
฿117,930HALO20+ radar offers an almost real-time view, with industry-leading 60 RPM operation at close range for the ultimate in collision avoidance. Identify hazards in an instant with VelocityTrack™ Doppler technology, and enjoy simultaneous short and long-range coverage—up to 36 nautical miles — from one compact 20-inch dome antenna. -
H5000 Hydra Base Pack
฿137,150The H5000 Hydra CPU is the brains behind the ultimate cruiser/racer system. Its ultra-fast ARM processors deliver data in an instant and the browser-based setup allows straightforward and flexible configuration. It Provides core components to start your H5000 system design. -
The rubber exhaust hose is the most flexible hose available, because of the large number of spiral turns and the smooth EPDM rubber. The completely smooth internal surface of the hose will reduce back pressure in the engine. Exhaust hoses with an internal diameter up to Ø 152mm have a bending radius of 1,5 x the diameter. Exhaust hoses with an internal diameter of more than Ø 152mm have a bending radius of twice the diameter. Temperature resistant between -30º + 100ºC with brief temperatures of 115ºC.
Bending radius (mm) 77 Suitable for Exhaust Max. pressure (bar) 4 Weight (kg) 1 Internal diameter (mm) 51 External diameter (mm) 59 Hose application Waste water -
NAC-3 Autopilot Core Pack
฿121,430Comes with NAC-3 Autopilot Computer, Precision-9 Compass and RF-25N Rudder Feedback unit -
NSS9 evo3S with world basemap
฿118,520The high-definition 9-inch display is ideal for center consoles and other powerboats, delivering clear, detailed views in all conditions. Powered by a high-performance iMX 8 processor, it offers ultra-fast response times and impressive functionality in a compact form. Enjoy stunning clarity and ultra-wide viewing angles, along with a durable, all-weather touchscreen and keypad for reliable control in any environment. Comes preloaded with a world basemap for essential navigation right out of the box. -
Cooling water strainer for recommended input of 91 l/min. With transparent cover for easy inspection of the filter content. Materials: Housing: Polypropylene GF Filter element: HD Polyethylene Cover: Styrol/Acrylnitril SAN All VETUS cooling water strainers are provided with a transparent cover, allowing easy inspection of the filter without dismantling. Cleaning of the filter can be achieved quickly and easily. Due to the large active surface however, the filter seldom needs to be cleaned.
Installation above/under waterline Above Recommended input (litres/minute) 91 -
Rubber Exhaust Hose.76mm. 3″
฿3,715The rubber exhaust hose is the most flexible hose available, because of the large number of spiral turns and the smooth EPDM rubber. The completely smooth internal surface of the hose will reduce back pressure in the engine. Exhaust hoses with an internal diameter up to Ø 152mm have a bending radius of 1,5 x the diameter. Exhaust hoses with an internal diameter of more than Ø 152mm have a bending radius of twice the diameter. Temperature resistant between -30º + 100ºC with brief temperatures of 115ºC.Bending radius (mm) 114 Suitable for Exhaust Max. pressure (bar) 3.3 Internal diameter (mm) 76 External diameter (mm) 84 Hose application Waste water
VISIT OUR ONLINE STORE NOW!NEW STOCK AVAILABLE !SPECIAL DISCOUNTS ON BULK ORDERS
